Technical Specifications:
- Detection system: Simultaneous breaking of 4 beams
- Infrared beam: LED pulsed beam, Double modulation
- Protection distance: Outdoor 100m (330ft) or less, Indoor 200m (660ft) or less
- Beam arrival distance (max.): Outdoor 1000m (3300ft) or less, Indoor 1000m (3300ft) or less
- Response time: 50msec. to 700msec. (Standard : 50msec)
- Supply voltage: 12V to 30VDC (Non-polarity)
- Current consumption: 32mA or less
- Alarm output: Dry contact relay output form C, Action : Interruption time (min 2sec.), Contact capacity : 30V AC/DC, 1A (resistive load), Protective resistor
- Environmental Output: Dry contact relay output form C, Action : Output when weather conditions worsen, Contact capacity : 30V AC/DC, 1A (resistive load), Protective resistor
- Tamper output: Dry contact relay (N.C.), Action : Activated when cover is detached, Contact capacity : 30V AC/DC, 1A (resistive load), Protective resistor
- Alarm LED: Red LED (Receiver), ON : when an alarm is initiated
- Attenuation LED: Red LED (Receiver), ON : when beam is attenuated
- Functions: Modulated beam frequency selection (4-Channel), Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack, Tamper, Response time adjustment, Upper / Lower beam switch, Frost proof cover
- Ambient temperature range: -35°C to +66°C (-31°F to +151°F)
- Mounting positions: Outdoor (Perimeter protection)
- Wiring: Terminals
- Weight: Transmitter : 1.4kg (49oz), Receiver : 1.47kg (51.5oz)
- Appearance: PC resin (wine red)
|