Potter Amseco OSYSU-2 Outside Screw and Yoke Valve Supervisory Switch, Double Switch 10 Amp At 125/250 Volt AC, 2 Amp At 30 Volt DC Resistive, 10 mA Minimum At 24 VDC, Die Cast Cover, Die Cast Base, Red Powder Coated Cover, Black Powder Coated Base

The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve. The OSYSU-2 contains two sets of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2 to 12 (50mm to 300mm). They will mount on some valves as small as (12,5mm). The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device.

UPC: 785192000556
Also known as: PL-OSYSU2, OSYSU2

Technical Specifications: Weight 1.6 lbs (0.73 kg) Enclosure: Cover: Die Cast Finish: Red Powder Coat; Base: Die Cast Finish: Black Powder Coat. All parts have corrosion resistant finishes Cover: Tamper Tamper Resistant Screws, Optional Cover Tamper Switch Available Contact Ratings: One Set of SPDT (Form C) 10.0 Amps at 125/250 VAC, 2.0 Amps at 30VDC Resistive, 10 mAmps minimum at 24 VDC Environmental Limitations: -40º F to 140ºF (-40ºC to 60ºC), NEMA 4X (IP 65) and NEMA 6P (IP 67) Enclosure (Use suitably rated conduit and connector) Indoor or Outdoor Use Conduit Entrances: Two Knockouts for 1/2” conduit provided

For more information about the Potter / Amseco OSYSU-2, please contact us.