Potter Amseco 1010210 OSYSU-CRH Corrosion Resistant Outside Screw and Yoke Valve Supervisory Switch

The OSYSU-CRH is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve in corrosive environments. The OSYSU-CRH provides additional corrosion protection on top of the NEMA 4X enclosure with corrosion resistant mounting hardware. These switches mount conveniently to most OS&Y valves ranging in size from 2 to 12 (50mm to 300mm). They will mount on some valves as small as (12,5mm). The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device.

UPC: 785192022206
Also known as: OSYSU2CRH

Technical Specifications: Weight 1.6 lbs (0,73 kg) Enclosure: Cover: Die Cast Finish: Red Powder Coat, Base: Die Cast Finish: Black Powder Coat, All parts have corrosion resistant finishes Cover Tamper: Tamper Resistant Screws, Optional Cover Tamper Switch Available Contact Ratings: OSYSU-1: One Set of SPDT (Form C); OSYSU-2: Two Sets of SPDT (Form C); 10.0 Amps at 125/250 VAC; 2.0 Amps at 30VDC Resistive; 10 mAmps minimum at 24 VDC Environmental Limitations: -40º F to 140ºF (-40ºC to 60ºC), NEMA 4X (IP 65) and NEMA 6P (IP 67) Enclosure, (Use suitably rated conduit and connector) Indoor or Outdoor Use (See OSYSU-EX Bulletin 5400705 for Hazardous locations) Conduit Entrances: Two Knockouts for 1/2” conduit provided Service Use: NFPA 13, 13D, 13R, 72

For more information about the Potter / Amseco OSYSU-2-CRH, please contact us.