The Model IFS-WPS is a low turn radius (1.88") flow switch used in liquid flow lines carrying water or any fluid not harmful to brass, stainless steel, or EPDM, and not classified as a hazardous fluid.
This gadget is solely meant to be used as an operating control. It is the installer's responsibility to implement safeguards (safety, limit controls) that guard against, or mechanisms (alarm, supervisory systems) that warn of, control failure in situations where it could lead to property loss or bodily injury.
UPC: 785192009023.0
Also known as: PL-IFSWPS
Technical Specifications:
- Maximum Service Pressure: 250 PSI
- Enclosure: Die-cast housing and high impact resistant polycarbonate cover. Not for use in hazardous locations.
- Contacts: One SPDT (Form C) switch, 10 Amps at 125/250VAC, .5 Amps at 125VDC, .25 Amps at 250VDC
- Motor Ratings: 115VAC & 230VAC
- Horsepower: 1/3
- AC F.L.A.: 7.2 (115 VAC), 3.6 (230 VAC)
- AC L.R.A.: 43.2 (115 VAC), 21.6 (230 VAC)
- Pilot Duty Rating: 332VA, 120/240VAC
- Environmental Specifications: Suitable for indoor or outdoor use with factory installed gasket and die-cast housing; NEMA 4 Rated Enclosure - use with appropriate conduit fitting.
- Ambient Temperature Range: 32°F to 150°F (0°C to 66°C)
- Media Temperature Range: -20°F to 250°F (-29°C to 121°C)
- Pipe Connection: 1 in. NPT Brass
- Conduit Entrance: One opening for 1/2'" conduit
- Usage: For pipe sizes 1'" - 8'"
|
For more information about the Potter / Amseco IFSWPS, please
contact us.