The Potter Amseco APS-SA is an addressable, single action pull station that provides an addressable point for a Potter alarm system. The unit has terminals that allow the signaling line circuit (SLC) to be wired directly to the device and then exit to the next device in the loop.
The APS-SA is activated by simply pulling the white "T" bar handle down. To reset the pull station, push the white "T" bar into the normal position. The unit will mount in a single gang box or the Potter P32-BB surface mount back box.
UPC: 785192021933
Also known as: PL-APSSA, APSSA
Technical Specifications:
- Rated Voltage: 22 to 24 VDC
- Standby Current Draw: 0.325 mA
- Alarm Current Draw: 0.325 mA
- Temperature Range: 32F to 120F (0C to 49C)
- Relative Humidity Range: 0 to 93% (non-condensing)
|
For more information about the Potter / Amseco APS-SA, please
contact us.