The VH851M is an eight port active video hubs with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other Nitek UTP video equipment including, video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.
Multi-channel video receiver hubs provide excellent video quality through two video outputs per channel. Twisted pair installations are made with a choice of the standard screw terminal connections, or the modular jack connections featured on the M series. The VH851M can receive video up to 1,500 feet (450 meters) when used with passive transmitters. These hubs provide superior immunity from noise and interference, even when run in common raceways with AC power.
UPC: 661955085124
Also known as: N1-VH851M
Technical Specifications:
- Size: 1 RU x 6.0"D
- Power Requirements: 12 to 24 VAC/VDC @ 450mA (Wall transformer provided with unit)
- Video Input: Balanced low voltage current loop
- Video Output: 1 Vpp composite video monochrome or color
- Common Mode Rejection: >70dB
- Video Format: RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
- Twisted Pair Connection: RJ45 jack connectors
- Output Connection: Dual BNC Connectors
- Wire Size: 26 to 12 AWG Unshielded Twisted Pair
- Operating Frequency: DC to 10 MHz
- Recommended Transmission Distance: Up to 1,500 feet (450 meters) w/passive baluns
- Transient Immunity: Built-in
- Temperature Range: -20 degrees C to +55 degrees C
- Humidity Range: 0 to 98% non-condensing
- Enclosure Type: Standard 19" rack 1 RU in height
- Shipping Weight: 8 lbs
- Wire Spec: 26 to 12 AWG Unshielded Twisted Pair (UTP)
- DC Loop Resistance: 51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
- Normal Capacitance: 17pF/ft.
- Impedance: 100 Ohms +/- 20%
- UTP Category: 2 or better
|
For more information about the Nitek VH851M, please
contact us.