Power video balun to combine CCTV video, camera power and data for camera control for operation over twisted pair up to 750 feet (225 meters) in conventional UTP applications, 100 meters in TIA/EIA 568 applications.
The VB43ATF is a unique transmission device which provides an economical means of sending video, camera power and 2 wire control signals over a standard Category 5 cable. Video is sent over one pair, 2 wire control signals over a second pair and camera power is sent over the two remaining pairs. A mini-coax pigtail with male BNC is used on the VB43ATF. Two pair of screwless terminals are provided to connect 2 wire control signals and power (wires are provided for these connections). Connections to the Category 5 cable are made via an RJ45 connector.
The VB43ATF power video balun provides the same high immunity to noise and interference as all of the Nitek baluns. This simplified wiring scheme provides a convenient method of powering the camera, allowing for quicker and easier installations. The RJ45 modular jack uses standard 568B wiring so spare network cables can be used. The VB43ATF also offers indication lights for the presence of power and data.
UPC: 661955004330
Also known as: N1-VB43ATF, NTK-VB43ATF
Technical Specifications:
- Size w/mounting tabs: 0.87"H x 1.87"W x 1.25"D
- Power Requirements: NONE REQUIRED
- Power Pass Through: 250mA @ 1,000 feet (300 meters)on 24 AWG; 1 Amp @ 100 feet (30 meters) on 24 AWG
- Video Input: 1 vpp composite video, monochrome or color
- Output: Balanced low voltage current loop
- Modular Jack: Standard RJ45
- System (2 Transceivers Required):
- Video Format: RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
- Video Input: 1 vpp composite video monochrome or color
- Operating Frequency: DC to 10 MHz
- Common Mode Rejection: >60 dB typ.
- Temperature Range: -10 degrees C to +85 degrees C
- Humidity Range: 0 to 98%, non-condensing
- Transient Immunity: 6,000 V 1.2uS x 50 uS per ANSI / IEE 587 C62.41 B3; 3,000 A 8uS x 20 uS when ground screw terminal is connected to earth-ground
- Twisted Pair Connection: RJ45 modular connector
- Transient Immunity: Built-in
- Wire Spec: 26 to 12 AWG Unshielded Twisted Pair (UTP)
- DC Loop Resistance: 51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
- Normal Capacitance: 17pF/ft.
- Impedance: 100 Ohms +/- 20%
- UTP Category: 2 or better
|
For more information about the Nitek VB43ATF, please
contact us.