Nitek VB39M Video Balun with Surge Suppression for UTP Cables

The VB39M is a passive UTP video balun for twisted pair transmission of CCTV video. The VB39M is a "heavy duty" design with two screw terminals for UTP connection and a female BNC for coax connection. The VB39M has built-in surge suppression for added equipment protection.

The VB39M video balun is a transceiver that provides a low cost means of sending live video over unshielded twisted pair, point-to-point wiring for distances of up to 750 feet (228 meters), with other CCTV balun transceivers, up to 1,500 feet (450 meters) with the TR515 single channel receiver and model 51 series hubs, up to 3,000 feet (900 meters) with the TR560 single channel receiver and 56 series hubs. The VB39M is compatible with all of the up-the-coax control systems.

A basic system uses (2) VB39 units, one at each end of a twisted pair of wires. These units are intended for use over existing in-house telephone wiring, Category 5 wiring or other twisted pair cable runs to provide a convenient, cost-effective alternative to coax.

The VB39M is designed to provide superior immunity from noise and interference even when running next to line power. The VB39M also provides a convenient mounting tab for ease of installation. The VB39M is a UTP transceiver that provides another Security Transmission Solution from Nitek.

UPC: 661955003920
Also known as: N1-VB39M, NTK-VB39M

Technical Specifications: Size: 1.3" (H) x 2.0" (W) x .95" (D) Power Requirements: NONE REQUIRED Input: 1 vpp composite video, Monochrome or Color Output: Balanced low voltage current loop Shipping Weight: 1 lb for single unit System (2 Transceivers Required): Video Format: RS170, NTSC, PAL, SECAM, CCIR (Color or B/W) Video Input: 1 vpp composite video monochrome or color Operating Frequency: DC to 10 MHz Common Mode Rejection: >60 dB typ. Temperature Range: -40 degrees C to +85 degrees C Humidity Range: 0 to 98%, non-condensing Transient Immunity: 400A V 1.2uS x 50 uS per ANSI / IEE 587 C62.41 B3, 400A 8uS x 20 uS when ground screw terminal is connected to earth-ground Enclosure Material: Black ABS flame retardant plastic Twisted Pair Connection: Screw terminals Wire Spec: 26 to 12 AWG Unshielded Twisted Pair (UTP) DC Loop Resistance: 51 Ohms/1,000 feet (max) (51 Ohms/300 meters) Normal Capacitance: 17pF/ft. Impedance: 100 Ohms +/- 20% UTP Category: 2 or better

For more information about the Nitek VB39M, please contact us.