Nitek TR560x4 Modular Card, UTP Transmission Up to 3000ft, Active Transmitters Up to 6000ft

The TR560x4 modular card is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using the RK400 card cage (not included). This modular plug-in feature allows the system to be custom configured for each application and provides easy expandability.

The TR560x4 is designed for operation over category 2, 3, 4 or 5 twisted pair cable. The system works equally well over existing communication and computer network spare pairs or new cable installations. A highly balanced transmitter output design assures that the system will not interfere with other equipment on the network. Advanced receiver electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with minimum loss.

A DIP switch on the receiver unit provides incremental adjustment of gain and frequency compensation to allow the system to be fine-tuned for an existing cable. This unique feature provides adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin. The TR560x4 includes only the receiver card.

UPC: 661955056087
Also known as: N1-TR560X4

Technical Specifications: Size: 1 card slot Power Requirements: Card powered by modular rack Input: (4) Balenced low voltage current loop Output: (4) 1vpp composite video monochrome or color Common Mode Rejection: >70dB Transient Immunity: Built-in Shipping Weight: 1 lbs. Wire Spec: 26 to 12 AWG Unshielded Twisted Pair (UTP) DC Loop Resistance: 51 Ohms/1,000 feet (max) (51 Ohms/300 meters) Normal Capacitance: 17pF/ft. Impedance: 100 Ohms +/- 20% UTP Category: 2 or better

For more information about the Nitek TR560X4, please contact us.