The capacity of the GEMC-Series control panels may be expanded through the use of a GEMC-EZM8 Zone Expansion Module. Each GEMC-EZM8 module provides up to 8 additional zones, and may be configured to provide for either 4 zones or 8 zones. Using either configuration, several GEMC-EZM8 modules may be combined as necessary to supply the required number of zones to the GEMC-Series control panel. Refer to the GEMC-Series control panel installation instructions (WI1653) for wiring requirements.
Technical Specifications:
- Input Power: 12.5 - 7.5VDC, 60mA.
- Zone Loop current: 4.7mA nominal, 5.5mA when shorted.
- Maximum Zone Loop Resistance: 300 ohms.
- 2.2K End of line resistor (UL Listed part number EOL2.2K required in Fire applications).
- PGM Output (Active low): 5mA, 12V. Connect only to power-limited circuits less than 14VDC. Use only in Burglary applications.
- Ground Faults Detected: 1.25KΩ to ground or less.
|
For more information about the Napco GEMCEZM8, please
contact us.