Honeywell Access NX1MPS One door Starter Panel, Standard (Metal) Enclosure with Tamper Switch and Terminal Block

The Honeywell Access NX1MPS is a single door, standard metal enclosure with a tamper switch and terminal block, power supply and 12V 7AH battery. The NX1MPS is a single door solution for the NetAXS-123 system, with add-on Boards available for expanding current installations to 2 and 3 door solutions.

UPC: 781410981560
Also known as: NC-NX1MPS, HCS-NX1MPS

Technical Specifications: Door/Read Capability: NX1MPS Expandability: Expandable up to 93 DOORS (186 readers) per controller loop Dual Reader Control Capability (IN/OUT Reader per Door): YES IN and OUT reader capability per door (readers must have HOLD line capability) Reader Compatibility: Standard Wiegand protocol supported ABA not supported Number of Inputs: Controller has a total of six configurable four-state supervised input points. (Factory default settings are Status, REX, Reader Tamper A, Reader Tamper B, Power Fail and General Input) Input Expandability: 2-door solution has a total of 10 inputs (requires NXD1 add-on board). 3-door solution has a total of 14 inputs (requires NXD2 add-on board) Removable Terminal Blocks with Color Coded Labels: Yes Graphic Wiring Cards/Labels: Yes Captive Mounting Hardware: Yes Cable Shield Termination Points: Yes Real Time Clock Global Geographic Time Zone Support / Daylight Saving Time Support Clock Synchronization: Yes - via NTP network server Processor: Freescale Coldfire 32-bit System MTBF (mean time between failures): 250,000 hours Certifications and Approvals CE and FCC compliant, UL-294 listing pending

For more information about the Honeywell Access NX1MPS, please contact us.