Some cylinders are impossible to pick. Even the best locksmith may be foiled by a broken cylinder spring, corroded pins, etc. In these cases drilling is the answer. HPC jigs assure perfect alignment on the shear line for drilling with the included bit.
The SFIC Cylinder Drill Jig provides precise drilling points for both the control lug and the shear line. By drilling the control lug, the core can be removed and the door opened. With the core removed, the pins can be decoded and a new control key can be code-cut. By drilling the shearline, access can be gained immediately. 2 key blades for Best are included. If you are drilling an SFIC cylinder other than Best, then you will need to prepare the appropriate key blades.
Also known as: CDJ3
Technical Specifications:
|
For more information about the HPC CDJ-3, please
contact us.