Fire-Lite SD355R Remote Test Capable Addressable Photoelectric Smoke Detector, B210LP Base

  • JMAC SKU: FIRE-LITE-SD355R
$85.98
+ Free Shipping
In Stock
The Fire-Lite SD355R is an addressable, remote-test capable, photoelectric smoke detector used exclusively with Fire-Lite's MS-9200, MS9200UD, and MS9600 addressable fire alarm control panels (FACP).

The detector's single-source, dual-chamber system uses analog technology to communicate smoke density levels to a central control panel, with the sensor address coordinated using a rotary decade switch system. The device is equipped with LED lights to signal sensor activity, a removable cover and insect screen for easy cleaning, and built-in tamper resistance. Fire-Lite B350LP base included.

Addressable fire alarms can speed up emergency personnel response time because they are better at locating the source of a fire in its early stages by using direct, precise communication.

UPC: 783863042065
Also known as: FL-SD355R

Technical Specifications:
  • Voltage range: 15 32 VDC (peak).
  • Standby current: 300 A @ 24 VDC.
  • LED current: 6.5 mA @ 24 VDC (latched ON)
  • Size: 2.1" (5.33 cm) high; 6.1" (15.5 cm) diameter
  • Weight: 3.6 oz. (102 g)
  • Operating temperature range: -20C to 70C (-4F to 158F)


For more information about the Fire-Lite SD355R, please contact us.
  • Remote Test Capable
  • Two-wire loop connection
  • Unit uses base for wiring
  • Addressable by device
  • Rotary, decimal addressing: 01 99 with MS-9200 series, and 01 159 with MS-9600 series
  • Unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires
  • Sleek, low-profile design
  • Integral communications and built-in type identification
  • Built-in tamper-resistant feature
  • Removable cover and insect-resistant screen for simple field cleaning
  • Withstands air velocities up to 4,000 feet-per-minute (20 m/sec.) without triggering a false alarm
  • Factory preset at 1.5% nominal sensitivity for panel alarm threshold level
  • Visible LED blinks when the unit is addressed and latches on in alarm
  • Sealed against back pressure.
  • Direct surface mounting or electrical box mounting
  • Mounts to: single-gang box, octagonal box, or square electrical box
  • Fully coated circuit boards and superior RF/transient protection
  • 94-V0 plastic flammability rating
  • Low standby current
  • B210LP base included


2 Reviews

  • 5
    FIRE-LITE-SD355R

    Posted by 181144 on Feb 15th 2022

  • 5
    FIRE-LITE-SD355R

    Posted by 121106 on Dec 15th 2017